Driveways, pool decks, patios, sidewalks, and commercial surfaces — cleaned to the surface, not just the top layer.
Florida's climate is relentless on exterior surfaces. Year-round warmth, humidity above 70% for most of the year, heavy summer downpours, and organic debris from palms and tropical vegetation create ideal conditions for algae, mold, mildew, and biological staining to accumulate on concrete, pavers, wood, and virtually every exterior surface.
In Southwest Florida, a driveway that looks clean in March can have visible algae growth by June. Pool decks develop a slippery green film. Sidewalks discolor. Patio surfaces turn grey and dingy. This is not just an aesthetic issue — algae-covered concrete and pavers become slip hazards, and organic acids from biological growth gradually break down sealer coatings and the surface itself.
Rain Exterior Home Service provides professional pressure washing in Fort Myers, Cape Coral, Naples, Bonita Springs, Estero, and throughout Lee and Collier counties. We calibrate pressure to match your surface — concrete, brick, pavers, tile, or wood — and use professional-grade biodegradable cleaning agents that kill biological growth at the root, not just the surface. The result is a deeper, longer-lasting clean than DIY pressure washing typically achieves.
Every job starts with a surface inspection. We identify the type of staining, the material, and the right approach before any water touches your property. Our goal is not just a clean surface — it is a clean surface that stays clean longer.
What We Do
Remove oil stains, tire marks, mold, and algae from concrete driveways and walkways. Restores original color and improves curb appeal instantly.
Learn more →Algae and mold on pool decks are a slip hazard. We safely clean pavers, travertine, and concrete pool surrounds without damaging the finish.
Learn more →Screened enclosures, brick patios, and entertainment areas cleaned to remove the algae and grime that Florida humidity builds up year-round.
Learn more →HOA communities require clean walkways and sidewalks. We remove biological growth and staining to keep your property compliant and looking sharp.
Learn more →Storefronts, parking lots, loading docks, and building exteriors. We work around your schedule to minimize business disruption.
Learn more →Wood, vinyl, aluminum, and chain-link fences cleaned of algae, mold, and grime. Extends fence life and removes the green tint that Florida humidity causes.
Learn more →Results
How It Works
We inspect the surface, identify stains, and choose the right pressure and cleaning agents for your specific material.
Stubborn oil stains, organic growth, and efflorescence are pre-treated with biodegradable solutions before washing.
We use calibrated PSI matched to your surface — high for concrete, lower for brick and pavers — to clean without damage.
A thorough rinse removes all residue. We walk through the job with you before leaving to ensure your satisfaction.
Common Questions
In Southwest Florida, most driveways benefit from professional cleaning every 12 to 18 months. The combination of year-round humidity, heavy summer rainfall, and organic debris means algae and mold build up faster here than in drier climates. Homes near canals or with tree cover may need cleaning annually.
Yes, when done correctly. Pavers require lower PSI than concrete — typically 1,200 to 1,800 PSI versus 3,000+ for dense concrete. We adjust pressure based on the material and avoid disturbing the joint sand. After washing, we recommend re-sanding and sealing the pavers to restore their protection.
We use cold water for most residential applications, which is effective for algae, mold, and general grime on concrete and pavers. Hot water is more effective on grease and oil — we offer hot water service for commercial properties, garage floors, and heavily stained driveways upon request.
Stucco and painted surfaces should NOT be pressure washed at high pressure. For these surfaces, we use soft washing — low-pressure application of a cleaning solution that kills algae and mold at the source. We always inspect the surface first and recommend the appropriate method.
A standard two-car concrete driveway takes 45 to 90 minutes. Larger driveways, heavily stained surfaces, or jobs requiring pre-treatment take longer. We provide a time estimate when we quote your job.
What Homeowners Say
"My driveway looked brand new after the pressure washing. They got out oil stains I thought were permanent. Professional, on time, and the price was exactly what they quoted."
"Our pool deck was covered in green algae — embarrassing for a home we just bought. Rain Exterior Home Service cleaned it in under two hours and it looks incredible. Highly recommend."
"We have an HOA that requires annual pressure washing. These guys handle our driveway, sidewalks, and back patio every year. Reliable, professional, and worth every penny."
Serving Fort Myers, Cape Coral, Naples, Bonita Springs, and all of Southwest Florida. Most jobs quoted within 24 hours.
Rain Exterior Home Service
We Regularly Serve Homeowners in Southwest Florida: