Remove oil stains, algae streaks, tire marks, and biological growth from concrete and paver driveways throughout Southwest Florida.
Concrete driveways in Southwest Florida face an aggressive combination of environmental factors that driveways in other regions simply do not. Year-round warmth and humidity above 70% create ideal conditions for algae, mold, and mildew to colonize porous concrete surfaces. The rainy season drives organic debris — palm fronds, seed pods, soil — across driveways and into expansion joints. Sprinkler systems leave hard-water deposits and iron staining from well water. The result is a driveway that looks perpetually dingy even when the rest of your home is maintained.
Beyond aesthetics, algae-covered concrete is a slip hazard. In Florida's afternoon thunderstorms, a thin layer of biological growth makes a concrete surface as slippery as wet tile. HOA communities increasingly require homeowners to maintain clean driveways, walkways, and curb edges as part of community standards. Failing to keep up with algae growth can lead to HOA notices and fines in many Cape Coral and Fort Myers neighborhoods.
Rain Exterior Home Service provides professional driveway cleaning throughout Fort Myers, Cape Coral, Naples, Bonita Springs, Estero, and surrounding Lee and Collier County communities. We use commercial-grade pressure washing equipment with calibrated PSI matched to your surface type. Dense concrete driveways receive high-pressure treatment with a surface cleaner attachment that delivers an even, streak-free result. Brick pavers and stamped concrete are washed at lower pressure to protect joint sand and surface texture.
Every driveway cleaning job includes pre-treatment of oil stains and heavy organic buildup before washing, and a final edge and expansion-joint detail before we leave. If your driveway pavers have been cleaned and dried, we also offer paver sealing as a follow-on service to protect the surface and extend the life of the clean.
Results
How It Works
We assess the concrete or paver type, identify oil stains, rust, algae growth, and any cracks before choosing the right cleaning approach and PSI.
Oil stains, tire marks, and heavy organic buildup are pre-treated with professional degreasers and biodegradable cleaning solutions before any water is applied.
Calibrated pressure — up to 3,500 PSI for dense concrete, lower for pavers — removes embedded staining down to the pore level, not just the surface layer.
Expansion joints, edges, and curb transitions are detailed by hand. A final rinse removes all residue and leaves a clean, uniform surface ready for sealing if desired.
Common Questions
Most driveways in Fort Myers, Cape Coral, and Naples benefit from professional cleaning every 12 to 18 months. The combination of year-round humidity, summer rainy season, and organic debris from palms and tropical vegetation means algae and mold accumulate faster here than in drier climates. Homes with tree canopy overhead, near canals, or in shaded cul-de-sacs may need annual cleaning. If you see black or green streaks forming, the algae is already embedded — earlier treatment prevents deeper staining.
Yes. Fresh oil stains respond well to pre-treatment degreasers followed by high-pressure washing. Older, set-in oil stains may lighten significantly but not disappear entirely — this depends on how long the oil has been absorbed and the porosity of the concrete. We will tell you honestly what to expect before we begin. For oil-stained driveways, we recommend sealing after cleaning to prevent future absorption.
For standard concrete driveways, we use 2,500 to 3,500 PSI with a surface cleaner attachment that provides an even, consistent clean without the streaking that a wand nozzle creates. For brick pavers or stamped concrete, we reduce pressure to 1,200 to 1,800 PSI to avoid disturbing joint sand or damaging the surface texture. We always match pressure to material — high pressure on the wrong surface causes damage that is expensive to repair.
For concrete driveways, sealing is not always required but extends the time between cleanings and protects against oil and staining. For brick pavers, we strongly recommend sealing after cleaning — pavers are porous and will re-stain quickly without a sealer coat. Sealing over dirty or damp pavers traps stains permanently, so cleaning first is essential. Ask about our paver sealing service when requesting your driveway cleaning quote.
A standard two-car concrete driveway takes 45 to 90 minutes. Heavily stained driveways requiring pre-treatment or very large surfaces take longer. We provide a time estimate upfront. Your driveway is safe to walk on within about 30 minutes of cleaning and dry to drive on within 1 to 2 hours under normal Florida weather conditions.
What Homeowners Say
"My driveway had oil stains I thought were permanent and algae streaks all along the sides. They pre-treated everything and the driveway looked brand new. Even the expansion joints were clean. Highly recommend."
"Fast, professional, and exactly what was quoted. They brought the right equipment — not just a power washer from Home Depot. You can tell the difference in the result."
Serving Fort Myers, Cape Coral, Naples, Bonita Springs, and all of Southwest Florida. Most jobs quoted within 24 hours.
Rain Exterior Home Service
We Regularly Serve Homeowners in Southwest Florida: